11
Assembly and Disassembly
back side of the radio, as shown in Figure 5. Align the belt clip screws with
screw holes on the metal bracket of the belt clip, and then secure the screws.
Fig.5
Removing the Belt Clip
Loosen the screw to remove the belt clip. Please refer to the operations for
attaching the belt clip.
Attaching/Removing the Battery When the Belt Clip is Attached
When the belt clip is attached to the radio, please rst press the belt clip to
make its bottom up, and then attach/remove the rear cover and battery by the
stepsmentionedabove,asshowningure6.
Fig.6
To Next Page
Loading...
