7
ENVIRONMENTAL CONSIDERATIONS
INSPECT TOOLS & CALIBRATION
The LITHIUM SERIES Tool is a rugged industrial tool with an electric motor and electronic control. The following
environmental considerations will help maintain reliable tool operation. Pictured above, keep cooling vents clear (1), and
secure the tool per local practice (2) to protect from dropping.
• The tool should not be exposed to moisture. Do not operate in rain, snow or extreme humidity.
• The operating temperature of the tool is -4°F (-20°C) to 140°F (60°C).
• All Cooling Vents should be kept clear of dust, dirt and debris to allow internal fans to maintain airflow to keep the motor
and electronics within temperature limits, do not subject the tool to extreme dust environments that would clog the
vents or do not cover the vents with your hand.
• The tool and electronic components are not certified or approved for explosive environments or areas containing
combustible chemical materials.
• Inspect all components; if damaged report any sign of
damage to the shipper and do not use the tool.
• Inspect the tool before each use; repair or replace any
obviously worn or damaged parts.
• Maintenance must be performed by a qualified
technician.
• Modifying any of the components invalidates the
warranty.
• Check the calibration date on the tool. HYTORC
recommends tool recalibration annually.
• If more than a year has passed since last calibration,
contact HYTORC for recalibration.
• When not in use store all tool components in the plastic
storage case.
• Save all instructions and calibration reports in the
storage case.
1 2
. CARE AND HANDLING
To Next Page
Loading...
Need help?
General
