Hytorc LITHIUM Series Operation Manual

35
• The Tool is easily configured for tightening HYTORC Nuts.
• Identify the appropriate size HYTORC Nut Driver
• Slide the nut driver over the square drive and spline while aligning the set screw with the flat on the spline.
• Tighten the set screw to secure nut driver.
• Challenge the nut driver to make sure it is securely attached.
INSTALL THE HYTORC NUT DRIVER
. BOLTING WITH THE HYTORC NUT

Hytorc LITHIUM Series Specifications

General

Brand	Hytorc
Model	LITHIUM Series
Category	Tools
Language	English