Hytorc LITHIUM Series - Page 39

LITHIUM SERIES® Electric Torque Tool (BTM and BTM-DOC Models) Operations Manual
34
LOOSENING WITH THE HYTORC WASHER DRIVER
• The Tool provides the maximum torque capacity in reverse providing a powerful breakout capability.
• Press the center button to toggle to the Loosen mode.
• Position the driver over the nut and HYTORC reaction washer and hold the trigger and begin applying torque.
• During operation the status light turns amber. If the operation is successful the status light will turn green, if
unsuccessful the status light will turn red
• Remove the tool driver from the nut.
(CONT’D.)