11
TOGGLE TORQUE, ANGLE & RELEASE
The tool provides simple access to set Torque, Angle and Release by toggling the center button.
• Press and hold the center button for approximately 3 seconds and release it to access the Angle screen.
• Press and hold the center button for approximately 3 seconds and release it to access the Release screen.
• Press and hold the center button for approximately 3 seconds and release it to access the Torque screen.
• The torque setup screen is the home screen for operating the tool.
TORQUE
Push.
Hold for 3 seconds.
Release.
ANGLE
Push.
Hold for 3 seconds.
Release.
RELEASE
Push.
Hold for 3 seconds.
Release.
1 2 3
(CONT’D.)
To Next Page
Loading...
