3-15
4. DRIVE AXLE
INSTALLATION VIEW
1)
12 34 5
15L7APT15
1 Pinion shaft
2 Ring gear
3 Differential device
4 Axle shaft
5 Traveling brake
6 Hub reduction
7 Hub
1 Carrier assembly
2 Drive axle housing
3 Traveling brake
4 Hub
5 Oil level gage
234
7
65 1
4
15L7APT16
STRUCTURE
2)
The drive axle is connected with the transmission output gear and universal joint.
The power transferred by the universal joint is connected to the pinion shaft of drive axle, the
pinion shaft delivers the power to the differential device through the ring gear.
The power transferred to the differential gear is delivered to final drive through the axle shaft in
reduced at the hub reduction.
To Next Page
Loading...
