Chapter 4: Configuring Restricted Access 57
Figure 4.2: User Edit window (Admin user only)
a. If desired, edit the username by clicking in the Username field and typing a new name
between 1 to 15 characters.
b. If desired, set or change the password by clicking in the New Password field and typing a
password. Verify the new password by retyping the password in the Repeat Password
field. Passwords must be between 5 to 12 characters and must contain at least one number
and one alpha character.
c. Click OK to save the changes.
-or-
Click X or press Esc
to exit the window without saving changes.
5. To configure server access for the selected user, click Access. The User Access window opens.
Figure 4.3: User Access window
a. To assign all servers to the user, click the Check All button.
b. To assign an individual server to the user, click the checkbox next to the entry for
the server.
To Next Page
Loading...
