Cassette
16.
If
you
are using a cassette recorder to test
your
system, follow
the procedures below:
Familiarize yourself with
your
Cassette Users Manual
•
before continuing.
• Insert Diagnostic Aids cassette.
• Rewind
to
the beginning.
• Position System Unit switch
to
ON. (Wait for Self-test
to
complete.)
• Turn volume on cassette
to
high.
• Press play on cassette recorder.
• Type
load"ldcass
on
keyboard.
• Press
~
enter.
•
Look
to verify
that
your
cassette
is
turning.
• Wait for
.B
found
to
appear on screen, then wait
for
Ok
to
appear on screen.
• Type
RUN
on keyboard.
• Press
~
enter.
• Wait for option frame, approximately a minute
or
two.
•
Look
to
verify
that
your
cassette
is
turning.
• When cassette
is
loaded the screen will be similar
to
the
figure below.
Step
16 continues
on
next
page.
Setup 2-17
To Next Page
Loading...
