96 IBM : Hardware Maintenance Manual
168
Alert on LAN error
1. Run Setup. Check to see that Ethernet
and Alert on LAN are enabled.
2. System Board
3. Riser card
17X, 18X 1. C2 Security
175 1. Run Configuration. See “Setup Utility
program” on page 10.
2. System Board
176 1. Covers were removed from the computer
177
Corrupted Administrator Password
1. System Board
178 1. System Board
183 1. Enter the administrator password
184
No RFID Antenna
Make sure Asset Care and Asset ID are
enabled in Configuration/Setup
2. RFID Antenna
3. System Board
4. Riser card
185
Corrupted boot sequence
1. Set configuration and reinstall the boot
sequence
186 1. System Board
187 1. Clear Administration password
2. System Board
189 1. More than three password attempts were
made to access the computer
190
Chassis intrusion detector was cleared. This is
information only, no action required. If this
code does not clear:
1. System Board
1XX
Not listed above
1. System Board
201, 20X
Memory data error
1. Run Enhanced Diagnostics Memory Test
2. Memory Module
3. System Board
225 1. Unsupported Memory
229
External cache test error
1. L2 Cache Memory
2. System Board
262
POST detected a base memory or extended
memory type error
1. Run Setup. Check System Summary
menu for memory. (See “Setup Utility
program” on page 10.)
2. Run the Extended Memory Diagnostic
tests.
301 1. Keyboard
2. Keyboard Cable
3. System Board
303
With an 8603 error
1. Mouse
2. Keyboard
3. Keyboard Cable
4. System Board
POST Error Code FRU/Action
To Next Page
Loading...
Need help?
General