EasyManua.ls Logo

IBM 6339 - Beep Symptoms

IBM 6339
246 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Chapter 6. Symptom-to-FRU Index 91
Beep symptoms
Beep symptoms are short tones or a series of short tones separated by pauses
(intervals without sound). See the following examples.
Use the following table to diagnose beep symptoms.
Beeps Description
1-2-X One beep
A pause (or break)
Two beeps
A pause (or break)
Any number of breaks
4 Four continuous beeps
Beep Symptom FRU/Action
1-1-3
CMOS read-write error
1. Run Setup
2. System Board
1-1-4
ROM BIOS check error
1. System Board
1-2-X
DMA error
1. System Board
1-3-X 1. Memory Module
2. System Board
1-4-4 1. Keyboard
2. System Board
1-4-X
Error detected in first 64 KB of RAM
1. Memory Module
2. System Board
2-1-1, 2-1-2 1. Run Setup
2. System Board
2-1-X
First 64 KB of RAM failed
1. Memory Module
2. System Board
2-2-2 1. Video Adapter (if installed)
2. System Board
2-2-X
First 64 KB of RAM failed
1. Memory Module
2. System Board
2-3-X 1. Memory Module
2. System Board
2-4-X 1. Run Setup
2. Memory Module
3. System Board
3-1-X
DMA register failed
1. System Board
3-2-4
Keyboard controller failed
1. System Board
2. Keyboard
3-3-4
Screen initialization failed
1. Video Adapter (if installed)
2. System Board
Display

Table of Contents

Other manuals for IBM 6339

Related product manuals