38 IBM : Hardware Maintenance Manual
1. Remove the cover. See “Removing the cover - desktop model” on page 34.
2. Remove the adapter slot cover latch and the slot cover for the appropriate
expansion slot.
3. Remove the adapter from its static-protective package.
4. Install the adapter into the appropriate slot on the system board.
5. Install the adapter slot cover latch.
• To work with another option, go to the appropriate section.
• To complete the installation, go to “Replacing the cover and connecting the
cables - desktop model” on page 44.
What to do next:
To Next Page
Loading...
Need help?
General