Bar Code Command Set
Table 97 (Page 2 of 2). Bar Code Data Descriptor
Data Area Value Description Error Code
12-13 X'0001' -X'7FFF'
X'FFFF'
Y Extent of Bar Code Presentation Space in
L-units.
See “Notation Conventions” on page 27.
Use BCOC Y Extent
X'0207..05'
14-15 X'0000' Reserved
16 Bar Code Type. See “Bar Code Type, Name, and
Modifier Description and Values” on page 125
X'0403..00'
17 Bar Code Modifier. See “Bar Code Type, Name,
and Modifier Description and Values” on page 125
X'040B..00'
18 X'01' -X'FE'
X'FF'
Font Local ID
Default Local Font ID (OCR-A, B or Code 128
determined by Bar Code Type - Byte 16) Note 1
X'0404..00'
19-20
X'0000'
X'0008'
X'FF00'
X'FF07'
X'FF08'
X'FFFF'
Bar Code Color
Printer Default (Black)
Black
Printer Default (Black)
Printer Default (Black)
Color of Medium
Printer Default
X'0405..00'
Byte 21
X'11'
X'15'
X'19'
X'23'
X'26'
X'31'
X'36'
X'3F'
X'47'
X'FF'
Unit Module Width
0.017" BCAP Orientation 0/90/180/270
0.021" BCAP Orientation 0/180 UPC only
0.025" BCAP Orientation 0/180 UPC only
0.035" BCAP Orientation 90/270
0.038" BCAP Orientation 0/180
0.049" BCAP Orientation 90/270
0.054" BCAP Orientation 0/180
0.063" BCAP Orientation 90/270
0.071" BCAP Orientation 0/180
Default (0.017 Inches)
X'0406..00'
Note 2
Byte 22-23 X'0001' - X'7FFF'
X'FFFF'
Element Height in L-units
See “Notation Conventions” on page 27
Printer Default as specified by
Bar Code Type in Byte 16
X'0407..00'
Byte 24 X'01'-X'FF' Height multiplier X'0408..00'
Bytes 25-26
X'0000'
X'0002'
X'0003'
X'0014' to X'001E'
X'00C8' to X'012C'
X'FFFF'
Wide-To-Narrow Ratio (WE|NE)
WE|NE Not Applicable Note 3
2:1 Note 4
3:1
2.0:1 - 3.0:1
2.00:1 - 3.00:1
Printer Default as specified by Bar Code Type
(Byte 16) Note 5
X'0409..00'
Byte 27-end Ignored
Notes:
1. The Font Local ID specified in BCDD Byte 18 should be OCR-A, OCR-B or
Code 128 dependent on the Bar Code Type specified in BCDD Byte 16. The
default Font Local ID and Bar Code Type relationships are as follows:
122 6400 IPDS
To Next Page
Loading...
Need help?
General