IBM 6400 Programmer's Reference

IDPS Command Differences
Chapter 4. IPDS Command Differences
Under the IPDS Emulation Mode configuration menu, you can select either 4234
(default) or 6408. You select the 6408 mode when you are using this printer with
IPDS and PSF/MVS. The following information describes how specific IPDS
commands function differently when IPDS Emulation Mode is set to 6408.
For detailed information on all IPDS commands, please read Chapter 3, “IPDS
Commands Reference” on page 23.
Load Font Equivalence
Table 108. 4234 Emulation Load Font Equivalence X'D63F'
Data Area Value Description Error Code
Byte 0 X'00' - X'FE'
X'FF'
LOCAL-FONT ID X'0218..02'
X'0219..02'
Bytes 1-2 X'0001' - X'7EFF' FONT HOST ASSIGNED ID X'0218..02'
Bytes 3 - 4
X'0000'
X'5A00'
FONT INLINE SEQUENCE
0 Degrees
180 Degrees
X'0247..02'
Bytes 5 - 6 GCSGID (Ignored)
Bytes 7 - 8 X'xxxx'
X'FFFF'
CPGID X'021D..02'
Bytes 9 - 10 X'xxxx'
X'FFFF'
FGID X'021D..02'
Bytes 11 - 12 X'0000' Reserved
Byte 13 X'00' Reserved
Byte 14 Bit 0 0/1
Bit 1 00
Bit 2 00
Bit 3 0/1
Bit 4 0/1
Bit 5 0/1
Bit 6 0/1
Bit 7 0/1
FONT ATTRIBUTES
Symbol Set Font present in Printer = 1
Reserved
Double High = 1
Italicized = 1
Double Strike = 1
Bold = 1
Double Wide = 1
Byte 15 X'00' Reserved
Bytes 16-n Additional LFE ENTRIES X'023A..02'
Ó Copyright IBM Corp. 1995 135

IBM 6400 Specifications

General

Brand	IBM
Model	6400
Category	Printer
Language	English