IBM 6400 Programmer's Reference

Command Reject — X'80'
The following exception codes are the valid codes for a command reject
condition:
X'800100' Invalid IPDS Command Code
Explanation:
1. The command code is not recognized. A error length on a previous
command may have caused the current data to be processed as a
command.
2. The command is not supported.
Alte rn a te Ex c e p tion Actio n : None.
X'800200' Invalid IPDS Command Sequence
Explanation: The printer state is invalid for the received command.
Alte rn a te Ex c e p tion Actio n : None.
Inte rv e ntio n Re q uire d — X'40'
The following exception codes are the valid codes for an intervention required
condition and apply only to coax attachments:
X'400000' Printer Not Ready
Explanation: Incorrect forms device selection when in 4224 emulation mode.
Alte rn a te Ex c e p tion Actio n : None.
X'400100' Printer Out of Forms
Alte rn a te Ex c e p tion Actio n : None.
X'40E000' Forms Jam
Alte rn a te Ex c e p tion Actio n : None.
X'40E400' Cancel Print Key Pressed
Explanation: The Cancel Print key was pressed while the printer was receiving
IPDS data.
Alte rn a te Ex c e p tion Actio n : None.
140 6400 IPDS

IBM 6400 Specifications

General

Brand	IBM
Model	6400
Category	Printer
Language	English