IBM 6400 Programmer's Reference

X'030001'
•
X'030008'
Specification Check-Graphics — X'03'
The following exception codes are the valid codes for a graphics specification
check condition:
X'030001' Unallocated Graphic Order or Command Code
Explanation:
1. An attempt was made to execute an unallocated order code that is reserved
for future use.
2. An attempt was made to execute an unallocated command code that is
reserved for future use.
Alte rn a te Ex c e p tion Actio n : None.
X'030002' Reserved Byte Error or Invalid Default
Explanation:
1. A reserved byte in the graphic order is not set to zero.
2. The Set Current Defaults instruction attempts, in byte 2, to set an invalid or
unsupported attribute.
3. An invalid default byte value was received in the GDD.
Alte rn a te Ex c e p tion Actio n : None.
X'030003' Incorrect Drawing Order Length
Explanation: A drawing order length is invalid.
Alte rn a te Ex c e p tion Actio n : None.
X'030004' Invalid Attribute Value
Explanation: An attribute value for a graphic order or for a WGC Set Current
Default instruction is invalid.
Alte rn a te Ex c e p tion Actio n : Use the standard default value for that attribute.
X'030008' Truncated Order Error
Explanation: An order has been requested that is not a complete order. This
order is one of the following:
1. A fixed 2-byte order and the second byte is not in the segment.
2. A long order and the length byte is not in the segment.
3. A long order and the number of bytes following the byte containing the
length count to the end of the segment is less than the value of the length
count.
Appendix A. IPDS Exception Reporting Codes 145

IBM 6400 Specifications

General

Brand	IBM
Model	6400
Category	Printer
Language	English