IBM 6400 Programmer's Reference

X'024701'
•
X'024A01'
X'024701' Invalid WIC Scale Factor Value
Explanation:
1. The Pel Count Scale Factor value on the Write Image Control command is
not a valid or supported value.
2. The Scan Count Scale Factor value on the Write Image Control command
does not equal the Pel Count Scale Factor.
Alte rn a te Ex c e p tion Actio n : None.
X'024702' Invalid LFE Font Inline Sequence
Explanation: The Font Inline Sequence parameter in a Load Font Equivalence
command is not a valid or supported value.
Alte rn a te Ex c e p tion Actio n : None.
X'024801' Invalid WIC Scan Line Direction
Explanation: The Scan Line Direction parameter value on the Write Image
Control command is not a valid or supported value
Alte rn a te Ex c e p tion Actio n : None.
X'024901' Invalid WIC Scan Sequence Direction
Explanation: The Scan Line Sequence Direction value specified on the Write
Image Control command is not plus ninety degrees from the Scan Line Direction
value.
Alte rn a te Ex c e p tion Actio n : None.
Note: Plus ninety from 270, (X
'8700') must be X'0000'.
X'024A01' Invalid WIC Coordinate Specification
Explanation:
1. The Coordinate Definition value on the Write Image Control command is not
a valid or supported value.
2. The First Pel Location (X or I Direction) value on the Write Image Control
command is not a valid or supported value.
3. The First Pel Location (Y or B Direction) value on the Write Image Control
command is not a valid or supported value.
Alte rn a te Ex c e p tion Actio n : None.
Appendix A. IPDS Exception Reporting Codes 159

IBM 6400 Specifications

General

Brand	IBM
Model	6400
Category	Printer
Language	English