IBM 6400 - Page 178

X'026B01'
•
X'028101'
X'026B01' Excess Source Image Data
Explanation: The number of source image bytes received > the number implied
in the Write Image Control command.
Alte rn a te Ex c e p tion Actio n : None.
X'026B02' Invalid LPD Initial Baseline Coordinate
Explanation: On a Load Page Description command, the initial baseline
coordinate value is not a valid or supported value.
Alte rn a te Ex c e p tion Actio n : None.
X'027002' Invalid Units Value in an XOH SMS Command
Explanation: The units value in an XOH SMS command is invalid or
unsupported.
Alte rn a te Ex c e p tion Actio n : None.
X'027202' Invalid SMS X-Extent
Explanation: On the Set Media Size command, the X-extent is not a valid or
supported value.
Alte rn a te Ex c e p tion Actio n : None.
X'027302' Invalid SMS Y-Extent
Explanation: On the Set Media Size command, the Y-extent is not a valid or
supported value.
Alte rn a te Ex c e p tion Actio n : None.
X'027402' Invalid SMS Unit Base
Explanation: On the Set Media Size command, the unit-base is not a valid or
supported value.
Alte rn a te Ex c e p tion Actio n : None.
X'028101' Insufficient Storage for Overlayor Page Segment
Explanation: There is insufficient storage to process an overlay or page
segment.
Alte rn a te Ex c e p tion Actio n : None.
162 6400 IPDS