IBM 6400 Programmer's Reference

X'029701'
•
X'02AD01'
X'029701' OverlayNesting Limit Exceeded
Explanation: Depth of overlay nesting is greater than the maximum depth.
Alte rn a te Ex c e p tion Actio n : None.
X'029801' Suppression Number Outside Valid Range
Explanation:
1. On a Write Text command, the Begin Suppression number value is not a
valid or supported value.
2. In a LCC command, the suppression number value is not a valid or
supported value.
Alte rn a te Ex c e p tion Actio n :
1. Ignore the control sequence.
2. None.
X'029803' Temporary Baseline Move Error
Explanation:
1. The temporary baseline increment is not a valid or supported value.
2. The temporary baseline move direction is not a valid or supported value.
3. The temporary baseline move precision is not a valid or supported value.
4. Unsupported multiple offset temporary baseline move.
5. Unable to support temporary baseline move by printing full size characters.
Alte rn a te Ex c e p tion Actio n :
1. None for reasons 1 through 4.
2. For reason 5, present according to the substitution method.
X'02AC01' Insufficient Storage to Print the Sheet
Explanation: Page is too large for main storage.
Alte rn a te Ex c e p tion Actio n : None.
X'02AD01' Invalid Load Page Position Parameter
Explanation: The X Coordinate value on the Load Page Position command is not
a valid or supported value.
The Y Coordinate value on the Load Page Position command is not a valid or
supported value.
Alte rn a te Ex c e p tion Actio n : None.
Appendix A. IPDS Exception Reporting Codes 165

IBM 6400 Specifications

General

Brand	IBM
Model	6400
Category	Printer
Language	English