Device Control Command Set
Note: See “Bar Code Type, Name, and Modifier Description and Values” on
page 125 for a list of Bar Code Types supported by the 64XX printers.
Overlay Command Set
Page Segment Command Set
Loaded Font Command Set
Note: The printer reports the LF2 subset in the STM, but do not accept
downloaded symbol sets or the LSS command.
Table 21. Bar Code Command Set
Byte Value Description
0-1 X'000C' Vector Length
2-3 X'C2C3' Bar Code Command Set - BC1 Subset
4-5 X'FF10' BCD1 Data
6-7 X'1001' Unordered Bar Code Objects
8-9 X'4022' Color of Medium Supported
10-11 X'A004' All four orientations supported
Table 22. Overlay Command Set
Byte Value Description
0-1 X'0008' Vector Length
2-3 X'D6D3' Overlay Command Set
4-5 X'FF10' OL1 Subset
6-7 X'1505' Overlay Nesting = 5 Levels
Table 23. Page Segment Command Set
Byte Value Description
0-1 X'0006' Vector Length
2-3 X'D7E2' Page Segment Command Set
4-5 X'FF10' PS1 Subset
Table 24. Loaded Font Command Set
Special Data
Area
Value Description
Bytes 0-1 X'0006' Vector Length
Bytes 2-3 X'C3C6' Loaded Font Command Set
Bytes 4-5 X'FF20' LF2 Subset - Symbol Sets
Chapter 3. IPDS Commands Reference 45
To Next Page
Loading...
