IBM A10 Series

Chapter 2. Specications and requirements
Appliance specications
Table 2. General specications
Chassis Measurement
1U
17.2” W x 1.71 H x 30” L
Weight Up to 38 lb. barebone system
CPU
• A10: FC AJ21
• C10: FC AJ20
• M10: FC AJ20
Memory Up to 24x DDR4 DIMM slots Up to 2666MHz
L/RDIMM
PCIe
• 2x PCIe x16 add-on card (1x FHHL/1x HHHL)
• 1x OCP Network Mezz (x16)
• 1x OCP Mezz for Storage (x8)
Network Controllers On-board dual-port 10GbE, SFP+,
BMC
IPMI 2.0 with virtual media over LAN, and
KVM-over-LAN support
Front I/O USB 2.0 (1x)
Rear I/O USB 3.0 (2x), VGA (1x), 10GbE (2x), IPMI (1x)
Cooling 6 + 1 redundant, hot-swappable fans
Power 800W 1+1 Redundant, Hot-Swap PSUs
LEDs UID (front and rear), Power, System health,
Network activity, Disk activity
Temperature
• 10°C to 35°C operating
• - 40°C to 65°C non-operating
Storage Temperature 5°C to 45°C operating
Altitude
• 0 to 10,000 ft. operating
• 0 to 40,000 ft. non-operating
Table 3. Component specications
Component Model Feature Code Conguration
Rules
Description
©
Copyright IBM Corp. , 2020 3