Appendix C. Placing the computer on its side
Although your computer was designed to be placed on a desktop, you can
place your computer on its side by purchasing a special desktop stand. Small
form factor desktop models come with a special desktop stand. Use the
instructions in the following sections if you choose to place your computer on
its side.
Placing the small form factor desktop computer on its side
The following procedure applies to the small form factor desktop model
computer.
1. Your computer comes with an extra adhesive foot like the ones shown on
the bottom of the computer in the illustration below. Apply this adhesive
foot to the side of the computer at the rear of the computer cover.
2. Place the computer onto the stand as illustrated below, with the power
button and vent oriented at the top of the computer.
Placing the desktop computer on its side
The following procedure applies to the desktop model computer.
1. Assemble the computer stand. See the instructions provided with the stand.
© Copyright IBM Corp. 2000 113
To Next Page
Loading...
Need help?
General