IBM NetVista Hardware Maintenance Guide

14 IBM Desktop System HMM
BIOS Configuration/Setup Utility
The Configuration/Setup Utility lets you review and
change important information about the computer and
its hardware.
Working with the Configuration/Setup
Utility Menu
Starting the Configuration/Setup Utility
Follow these steps to enter Setup when the computer
is off:
1. Turn on your monitor.
2. Press and hold
F1
.
3. Turn on the system unit.
If you have previously set a password, you are
prompted to type in the password after you press the
F1
key. Refer to the Configuration/Setup Utility Main
Menu below.
Configuration/Setup Utility
Select Options:
•
System Summary
•
Product Data
•
Devices and I/O Ports
•
Start Options
•
Date and Time
•
System Security
•
Advanced Setup
•
Power Management Setup
Save & Exit Setup
Load Default Settings
Exit Without Saving
↓
↓↓
↓↑
↑↑
↑Move Enter:Select F1:Help
F10:Save ESC:Exit

IBM NetVista Specifications

General

Category	Desktop
Model	NetVista
Processor Type	Intel Celeron
Memory Type	SDRAM
Optical Drive	CD-ROM, DVD-ROM, or CD-RW
Graphics	Integrated Intel graphics
Audio	Integrated audio
Network	10/100 Ethernet
Operating System	Windows 2000, Windows XP (Varies by model)
Expansion Slots	PCI
Ports	USB, serial, parallel, VGA, audio in/out