General Information 17
Exiting Without Saving
Press
Esc
to return to the Main Menu when you have
finished viewing settings and making changes. Fro
this location, you can exit Setup but without saving
your changes.
Viewing System Information, and
Product Data
To view general hardware information about your
computer, select the System Summary option fro
the Configuration/Setup Utility main menu. The items
displayed in the System Summary menu are not
configurable.
Setup automatically updates this menu when you do
either of the following:
•
Add or change hardware on your computer
•
Make changes to other menus in Setup and save
those changes
To view the computer information such as the
machine type/model, flash EEPROM revision level,
system serial number, BIOS version, BIOS date, and
BIOS mode, select the Product Data option from the
Configuration/Setup Utility main menu. Like in the
System Summary menu, the items displayed are not
configurable.
Devices and I/O ports
If you install USB devices, video, IDE drives, audio, or
network drive, BIOS auto-detects the presence of
these devices. Enter Configuration/Setup Utility to
identify or verify the type of drive installed in the
computer.
Diskette Drive A
This option displays the size and storage capacity of
the currently installed diskette drive. The default is
1.44 MB, 3.5 in..
Diskette Drive B
This option displays the size and storage capacity of
the currently installed diskette drive. Empty drive
bays are indicated with a “None” default setting.
To Next Page
Loading...
