100 IBM Desktop System HMM
AMD K7 Duron Processor
NOTE:
Determine the type of processor you are
installing and make sure the jumpers are set
correctly. Run the Configuration/Setup Utility
after correctly installing a processor.
CAUTION:
Processors are sensitive to static
discharge.
•
Remove adapter cards if applicable.
•
Detach the heat sink cable from the fan connector.
•
Remove the fan sink by pressing the release tab
(rectangular end) and lifting it up from the
Processor.
•
Pull up the ZIF socket release lever.
•
Lift the processor out of the socket.
To Next Page
Loading...
Need help?
General
