IBM NetVista Hardware Maintenance Guide

General Information 25
The default of Power Management is set to User
Define, so it allows you to set each mode individually.
HDD Power Down
Whatever Power Management is set, the ranges are
from 1 min. to 15 min. and Disabled. The default is
Disabled.
Doze Mode
While Power Management is set to User Define, this
ranges are from 1 min. to 1 hour. and Disabled. The
default is Disabled.
While Power Management is set to Min Saving, this
parameter will be 1 min.
While Power Management is set to Max Saving, this
parameter will be 1 hour.
Suspend Mode
While Power Management is set to User Define, this
ranges are from 1 min. to 1 hour. and Disabled. The
default is Disabled.
While Power Management is set to Min Saving, this
parameter will be 1 min.
While Power Management is set to Max Saving, this
parameter will be 1 hour.
PM Control by APM
When set to Yes, an Advanced Power Management
device will be activated to enhance the Max. Power
Saving mode and stop the CPU internal clock.
When set to No, the Max. Power Saving is not
enabled.
Video Off Option
Based on an inactivity time-out, the system will enter
power saving management modes. There are three
modes, Always On, Suspend -> Off, and All Modes ->
Off, to determine whether turn off the monitor. The
default is Suspend -> Off.

IBM NetVista Specifications

General

Category	Desktop
Model	NetVista
Processor Type	Intel Celeron
Memory Type	SDRAM
Optical Drive	CD-ROM, DVD-ROM, or CD-RW
Graphics	Integrated Intel graphics
Audio	Integrated audio
Network	10/100 Ethernet
Operating System	Windows 2000, Windows XP (Varies by model)
Expansion Slots	PCI
Ports	USB, serial, parallel, VGA, audio in/out