7 Wait
15
seconds. Do all stations in the cluster
appear and remain on the screen presentation?
~~~~
B~BEl
CLUSTER
STATUS
FOR
AOAPTER
X
PRESS
ANY
KEY
TO
EXIT
Notes:
1.
Your installation manager has a cluster map
that lists the station addresses and the order
in which the stations are connected.
Compare the map and the status screen
presentation to determine that all stations in
the cluster are operating properly.
2.
The status screen shows all stations installed
on your cluster, and is updated every 3
seconds
to
show stations that are added
to
or
removed from the cluster.
YES - Your system has successfully completed
this test. Press any key and continue
with the next Test.
NO
- Go
to
the next step.
2200-8
Test
April 1984
To Next Page
Loading...
