IBM Power System POWER7 Series User Manual

3. Place the 571F/575B card set adapter on an ESD protective surface and orient it as shown in the
following figure.
4. Disconnect battery cable (A) and the SCSI cable (B) from the 571F storage adapter. Leave the other
end of the cables attached to the 575B auxiliary cache adapter.
8

IBM Power System POWER7 Series Specifications

General

Processor	POWER7
L2 Cache	256 KB per core
L3 Cache	4 MB per core
Memory Type	DDR3
Operating System	AIX, IBM i, Linux
Virtualization	PowerVM
Processor Cores	4, 6, or 8
Form Factor	Rack
Release Date	2010