Workplace Help
The online Hardware Management Console Guide is used for the Workplace help.
The book is opened and automatically goes to the correct topic when:
The Help object is dragged and then dropped on any other object or area of the workplace.
Any object is dragged and then dropped on the Help object.
The emphasis (dotted box) is around an object in the workplace and F1 is pressed.
To close the online book:
Double-click on the system icon located in the upper left corner of the online book window.
OR
Single-click on the system icon and then select close.
Window Help
You can get window help by:
Selecting help from the menu bar.
Pressing F1.
Selecting the Help push button when it is available.
When you request help, a help window displays. The kind of help you get is determined by what you
selected before you requested help or what task you were doing when you requested help. If the
selection cursor is on the menu bar choice (highlighted), a pull-down choice or on a field in a pop-up
window, the help will specifically relate to that choice or field.
To get help for a menu bar choice or pull-down choice, highlight the choice and then press F1.
To get help for a field, click on the field (or press the Tab key to move the cursor to the field). Then press
F1.
A Help choice appears on the menu bar of every window. The associated Help pull-down includes:
Extended Help for general information about the application you are using.
Keys Help for a list of key assignments for the application you are using.
Help Index for a list of help topics.
2-2 Getting Started
To Next Page
Loading...
