Power-on Reset:
1. Open Task List from the Views area
2. Open CPC Recovery from the Task List Work Area
3. Open Groups from the Views area
4. Select CPC from the Groups Work Area
5. Drag and drop the selected object on Power-On-Reset in the CPC Recovery area
The Power-on Reset panel displays.
6. Select ESA/390 mode and IOCDS D0, then select OK.
The Change Storage Size panel displays.
7. Select the storage size for your system, then select OK.
The Confirm the Action panel displays.
8. Select Power-on reset
A power-on reset in progress panel displays while the power-on reset is performed. A power-on reset
takes approximately 5 minutes to complete. When complete, a message displays confirming the function
is complete.
9. Select OK on the Power-on Reset message panel.
3-4 Getting Started
To Next Page
Loading...
