Table 14. Critical information checklist (continued)
Checked? Data Notes
Notes regarding supportshow
output
Information about the new chassis
New factory serial number
New serial number (if available)
2. Open a telnet session and log into the device as admin. The default password is password. Enable
the logging function on your telnet or serial console connection.
3. Back up the current conguration by entering the configUpload -all. Enter the requested
information at the prompts.
Note: If you are using the Virtual Fabric feature, run configupload -vf before running the
configupload command to save the logical switch conguration.
This configUpload -all command uploads the device conguration to the customer-dened FTP
server, making it available for downloading. Alternatively, you can save the conguration le to a USB
device. For more information about this command, refer to the Fabric OS Command Reference.
switch:admin> configupload
Protocol (scp or ftp) [ftp]: ftp
Server Name or IP Address [host]: 123.123.123.123
User Name [user]: Admin24
File Name [config.txt]: config-switch0.txt
Password:
Upload complete
switch:admin>
4. Record the WWN value: Enter wwn, and then copy the command output into a le named cong-
miscinfo.txt.
switch:admin> wwn
10:00:00:60:69:00:00:0a
5. Enter ipAddrShow -sw, and then copy the command output into the cong-miscinfo.txt le.
switch:admin> ipaddrshow -sw
SWITCH
Ethernet IP Address: 14.25.60.14
Ethernet Subnetmask: 255.55.0.0
Fibre Channel IP Address: 1.2.3.4
Fibre Channel Subnetmask: 255.255.255.0
CP0
Ethernet IP Address: 14.25.60.10
Ethernet Subnetmask: 255.55.0.0
HostName : cp0
Gateway Address: 14.25.43.1
CP1
Ethernet IP Address: 14.25.50.13
Ethernet Subnetmask: 255.55.0.0
HostName : cp1
Gateway Address: 14.25.43.1
Backplane IP address of CP0 : 14.11.0.6
Backplane IP address of CP1 : 14.11.0.7
switch:admin>switch:admin>
6. Display and record the manufacturer serial numbers.
Enter chassisShow, and then copy the command output into the cong-miscinfo.txt le.
72
IBM Storage Networking SAN64B-6: SAN64B-6 Installation, Service, and User Guide