24
Inspection
The series of MAGI 2 circulation pumps is used mainly in water circulation in boiler
central heating systems in houses.
The MAGI 2 series circulation pump serves best in the following systems:
• xed-temperature heating system with variable ow,
• heating system with variable pipeline temperature,
• heating system with night mode,
• air conditioning system,
• industrial circulation system,
• home central heating.
The MAGI 2 series circulating pump is equipped with a permanent magnet motor
and a dierential pressure controller that automatically and continuously adjusts
the pump capacity to meet the actual needs of the system. The MAGI 2 series
circulating pump is equipped with a control panel on top of the motor for easy
operation by the user.
Benets of installation of MAGI 2 pumps. Ease of installation and launch
•
MAGI 2 series circulation pump has an auto-adaptation AUTO/ECO mode (factory
settings). In most cases, the pump can be launched without the necessity to intro-
duce any regulations and it can be automatically adapted to the current needs of
the system.
• High comfort of use
• Low noise level of the pump and the entire system
• Low power consumption
• Compared to the traditional circulation pump, power consumption of the MAGI 2
series pump is very low and can reach even 5 W, depending on the system.
To Next Page
Loading...
