EasyManua.ls Logo

icetro SCI-050 - Safety Cautions (Continued); Handling Water Leaks and Restarting

icetro SCI-050
28 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
11
To keep the ice for a long time, put it in a separate freezer.
- The temperature of the ice container of the Ice Maker is maintained by the
coldness of the ice, not by any additional freezing function.
- Therefore, the ice can melt down after a long time, unless you keep it in a
separate freezer.
Do not operate the switches too frequently.
- Otherwise, product failure may be caused.
If water leakage is identified, immediately unplug the power cord
and close the water supply valve.
- Check water connections.
- Unplugging the power cord with wet hands may cause electric shock.
After the product transportation and installation, wait for at least
two (2) hours before starting operation.
- The two (2) hours is the minimum time required to stabilize the refrigerant
system inside the product.
Caution
Attention!
Clean the ice container in the product frequently for hygiene.

Related product manuals