19
Disassembling, Cleaning
Please read and observe the following instructions
Otherwise, an electric shock or fire may break out.
- Do not spray water on the Ice Maker.
Otherwise, there is danger of current leak and/or electric shock.
Otherwise, the product can be corroded or damaged.
- Do not use powder soap, benzene, thinner, hydrochloric acid, oil, hot water,
or wire brush which may damage the product for cleaning.
When using a detergent.....
- Clean the product with a soft cloth soaked in warm water and/
or a neutral detergent.
- When cleaning with a neutral detergent, wipe the product again with a clean,
wet cloth.
Dangerous!
Warning : Unplug the power cord before cleaning the Ice Maker or replacing a part.
To Next Page
Loading...
