18
Correct Operation
Protecting the water supply hose
- Do not put a heavy thing or step on the water supply hose.
Operate at appropriate water pressure and temperature,
and ambient temperature;
- The pressure and temperature of the supply water must be 1.4kgf/㎠~
5.6kgf/㎠(20psi~80psi, 138kPa~550kPa), and 10℃~32℃(50℉~90℉),
respectively, and the ambient temperature must be between 10℃~40℃
(50℉~104℉).
1. Power Supply
- This Ice Maker is designed power supply and using an exclusive
receptacle.
2. Water Supply
- Open the water supply cock to feed water.
3. Ice Making Operation
- Turn on the switch on the front panel.
4. Completing Ice Making Operation
- According to the ambient temperature and feed water temperature,
the first ice making process will be completed after 20~30 minutes
from the starting-up of the ice making operation.
- After the first operation after installation or cleaning, reject the
first-formed ice, and use the ice from the second ice making cycle.
Power Switch
Operating Procedures
To Next Page
Loading...
