21
How to clean
7. Remove and clean-up the filter screen.
Caution:
Make sure to reinstall the filter screen. Otherwise, the nozzles may get clogged.
8. As illustrated in the figure on the right, open the Condenser
cover; clean the filter with warm water (about 25℃(77℉))
and/or a neutral detergent.
Dry the filter element before reinstallation.
※ Clean-up the filter element at least once a month.
Caution:
Take care of the sharp fins during cleaning work.
9. Clean-up the ice forming part before starting operation.
10. For cleaning, use a kitchenware-grade detergent or other agents easily solved in
water or vinegar. Clean-up the outer surface of the Ice Maker using a soft plastic
brush or sponge block and rinse well with clean water.
11. Do not use any detergent or powder which may damage the Ice Maker.
12. For thorough cleaning, repeat the above described cleaning process using an
appropriate detergent.
13. At the first operation after cleaning and/or sterilization, reject the first-formed ice,
and use the ice from the second ice making cycle.
14. The ice container must be sterilized at least once a month.
To Next Page
Loading...
