20
How to clean
1. Open the door of the Ice Maker.
2. Loosen and remove the screws on both sides of the panel,
and remove the swing flap.
3. Remove the sliding panel and clean-up the product
4. Remove the nozzle assembly and clean the part.
5. To clean-up the water pan, unplug the drain plug outward
and then the water in the pan will drain by itself.
6. Using a sponge block, clean up the dirt in the water pan.
Door
Swing flap
Filter Screen
Insert the drain plug after draining.
Elbow hose (drain hose)
Nozzles
Sliding panel
To Next Page
Loading...
