6
Warning
■
The Ice Machine must be plugged into a grounded outlet.
- Do not use an adapter or an extension cord.
- Do not remove the grounding prong.
- The unit must be installed in accordance with the state and local electrical
and plumbing codes.
■ The Ice Machine must be connected to a GFCI receptacle
or a GFCI circuit breaker.
- Rated sensitive current: 30mA.
- An ungrounded circuit may cause product failure or an electric shock.
■ The power cord should be removed by holding the plug.
- Do not remove plug by holding the cord or electric shock may occur.
- Damage to the cord could cause fire or electrical shock.
■
Do not connect or touch the power cord plug with a wet hand.
- Otherwise, the user may get an electric shock.
■
Check that the power plug is clean and without any foreign matter.
Insert the plug fully into the receptacle.
- If the pins of the power cord plug are dirty, wet or improperly connected to
the receptacle, electric shock or fire may occur.
■
When reconnecting the power cord after disconnection, wait for at
least three minutes before reconnection.
- Reconnection within three minutes may cause product failure.
Wait at least 3 minutes!
To Next Page
Loading...
