icetro WU-0100A - Cleaning the Condenser

36
CLEANING THE CONDENSER
General
n
Warning
Disconnect electrical power to the ice machine at
the disconnect/breaker box before cleaning the
condenser.
A dirty condenser restricts airflow, resulting in excessively
high operating temperatures. This reduces ice production
and shortens component life.
• Clean the condenser at least every six months.
n
Warning
The condenser fins are sharp. Use care when cleaning
them.
• Shine a flashlight through the condenser to check for
dirt between the fins.
• Blow compressed air or rinse with water from the
inside out (opposite direction of airflow).
NOTE: Cleaning the condenser will require the removal of
the bin on some models.