EasyManua.ls Logo

icetro WU-0100A - Detailed Descaling and Sanitizing Procedure WU-0100

icetro WU-0100A
166 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Detailed Descaling and Sanitizing Procedure
WU-0100
Ice machine cleaner is used to remove lime scale and
mineral deposits. Ice machine sanitizer disinfects and
removes algae and slime.
Step 1 Set the 'ICE/OFF/WASH' switch to 'OFF' and
wait for the ice machine to stop after the harvest cycle
ends and ice falls from the evaporator.
,
Caution
Never use anything to force ice from the evaporator.
Damage may result.
Step 2 Remove all ice from the bin.
n
Warning
Wear rubber gloves and safety goggles (and/or face
shield) when handling Ice Machine Cleaner or
Sanitizer.
,
Caution
Do not mix Ice Machine Cleaner and Sanitizer
solutions together. It is a violation of Federal law
to use these solutions in a manner inconsistent with
their labeling.
Step 3 To start the cycle set the 'ICE/OFF/WASH' switch
to 'WASH'.
Step 4 Wait until water flows over the evaporator
then add the proper amount of Nickle Safe Ice Machine
Cleaner to the water trough.
Model Amount of Cleaner/Descaler
Part Number 9405463
WU-0100 1.5 ounces (45 ml)
40

Table of Contents

Related product manuals