54
Entering a wash cycle
Placing the switch in the 'WASH' position will initiate
the cleaning cycle.
NOTE: Once a cleaning cycle has begun, the machine will
not make ice until the cleaning cycle is completed
(approximately 21 minutes). Additionally, once the
cleaning cycle has finished, all operation will stop and the
'ICE/OFF/WASH' switch must be placed back to the 'ICE'
position for the machine to resume ice making.
Bin Full
The 'FULL' light energizes when the bin is full or is de-
energized if the bin is not full. Additionally, the 'FULL'
light will flash when there is a was supply issue.
Error
The 'ERROR' light indicates the machine needs attention
and will light up, or flash together with the 'POWER'
light, when there is a problem.
• Refer to "Error Codes" on page 61 if this
light is energized.
To Next Page
Loading...
