iCharger 308DUO - Page 42

308DUO V1.1.0
Synchronous Balance Charger/Discharger
- 42 -
30XX
"Balance required!"
Balance port is unplugged
31XX
"Auto detect the number of cells failed, please
connect balance or set cells"
Check connection or balance port
32XX
"AD watchdog error"
AD watchdog error
33XX
"Synchronous mode: Channel outputs imbalance"
Channel outputs are imbalance in
Synchronous mode
34XX
"This channel is needed to access the resistor or
bulb load"
This regenerative channel is needed
to access the resistor or bulb load
35XX
"The other channel is occupied"
The other channel is occupied