14
• Heat temperature is displayed (50°F to 90°F)
10. Press the or button to adjust heat set temperature.
11. Press the button to advance to the next parameter.
• Cool temperature is displayed (45°F to 85°F)
12. Press the or button to adjust cool set temperature.
13. Press the button to advance to the next parameter.
Repeat Steps 1-13 to program each day of the week individually or use the Simpleset™ feature (see Page
15) to program every day the same as Monday.
When programming is complete, slide the Cool/Off/Heat switch to Heat or Cool to exit.
PROG must display on the screen for the thermostat to follow the program schedule. If PROG does not
appear, press the mode button once. If PROG flashes, it is in hold and will not make transitions. To exit
hold, press the hold button once.
To Next Page
Loading...
Need help?
General
