13
Program Overview
The SC3000 programmable thermostat has four periods (MORN, DAY, EVE, NITE) that are customizable
for each day of the week. Each period will have a start time, heat temperature, and cool temperature. The
SC3000 monitors the day and time, while maintaining the specific conditions you have chosen for each
period in your program.
1. Place Cool/Off/Heat switch in OFF position.
2. Press the button for 6 seconds.
3. Press the button twice:
• Day is displayed (1-7)
4. Press the or button to change the day you want to program (1=Monday, 2=Tuesday, etc.).
5. Press the button to advance to the next parameter:
Note: You can use the
button to return to the previous parameter.
• Period is displayed (MORN, DAY, EVE, NITE)
6. Press the or button to change period of day.
7. Press the button to advance to the next parameter.
• Set time is displayed
8. Press the or button to change set time.
9. Press the button to advance to the next parameter.
(continued on next page)
Programming
To Next Page
Loading...
