15
Simpleset™ programming is a convenient method of programming the thermostat. Once the entire
Monday (Day 1) schedule is set, Simpleset™ programming will copy the Monday schedule to every day of
the week.
After the complete Monday schedule is set (see Programming on Page 13), you are at the Day 2 screen:
1. Press the button once. Day 1 screen displays.
2. Press the button for 2 seconds:
• The days of the week will count down from 7 to 1 and this will lock the
settings into memory
• Once the schedule is locked in, you can go through each day and make
any changes you require; this feature speeds up the programming of
the standard weekday/weekend schedule
3. Slide Cool/Off/Heat switch to Heat or Cool to exit Program mode.
The SC3000 comes preprogrammed with the following schedule:
MORN 6:00 AM DAY 8:00 AM EVE 6:00 PM NITE 10:00 PM
HEAT 70°F HEAT 62°F HEAT 70°F HEAT 62°F
COOL 78°F COOL 85°F COOL 78°F COOL 82°F
MONDAY
thru
SUNDAY
Factory Programming
Simpleset™ Programming
To Next Page
Loading...
Need help?
General
