ICM Controls SC 3201 User Manual

23
The time and day of the week must be set for your program schedule to operate correctly.
1. Slide the System switch into the OFF position.
4. Press the button while the time is displayed. The display shows the day
currently set on the thermostat (1=Monday, 2=Tuesday, etc).
5. Press the or button to set the correct day of the week that today is.
Note: Sliding the System switch to Cool or Heat positions will lock the values into
memory. You may also press the button to enter your programming schedule.
2. Press the button in for 6 seconds.
3. Press the or button to adjust the time.
Setting the Time and Day of the Week

ICM Controls SC 3201 Specifications

General

Brand	ICM Controls
Model	SC 3201
Category	Thermostat
Language	English