Icom A120BE Basic Manual

D Receiver
• Receive system: Double conversion
superheterodyne
• Intermediate frequencies: 1st 38.85 MHz
2nd 450 kHz
• Sensitivity:
IC-A120 Less than 1 μV (pd)
(at 6 dB S/N)
IC-A120E Less than –101 dBm
(12 dB SINAD with CCITT)
• Squelch sensitivity:
IC-A120 Less than 0.35 μV (pd)
IC-A120E Less than –116 dBm
• Spurious response rejection ratio:
IC-A120 More than 5 mV (pd)
IC-A120E More than 70 dB
• Audio output power:
External speaker More than 10 W
(at 13.75 V DC with 8 Ω load 60% mod, 10%
distortion)
Side tone More than 100 mW
(at 13.75 V DC with 500 Ω load 60% mod,
10% distortion)
12
5
SPECIFICATIONS AND OPTIONS
05
Approved Icom optional equipment is designed for optimal
performance when used with an Icom transceiver.
Icom is not responsible for the destruction or damage to an
Icom transceiver in the event the Icom transceiver is used
with equipment that is not manufactured or approved by
Icom.
■ Options
HM-217 speaker micrOphOne
The speaker microphone with [∫]/[√] keys and [P1]/[P2]
keys.
VS-3
Bluetooth
®
headset
The Bluetooth
®
headset with a [PTT] switch.
UT-133A
Bluetooth
®
unit
OPC-871A headset adapter
The adapter to connect a standard headset.
OPC-478UC
clOning cable
The cable to connect a PC and the OPC-592 clOning
cable
adapter when you control the transceiver with
the CI-V commands.
OPC-592
clOning cable adapter
The cable adapter to connect the transceiver and the
OPC-478UC
clOning cable when you control the
transceiver with the CI-V commands.
All stated specications are subject to change without
notice or obligation.

Icom A120BE Specifications

General

Brand	Icom
Model	A120BE
Category	Transceiver
Language	English