Icom FR5000 - Appendix B: Checking RSSI Levels

8/19/2011 13
Appendix B: Checking RSSI Levels
1. Set a DMM to Vdc RMS.
2. Check the level at pin 10 on the repeater after assigning pin 10 to RSSI, as shown in the following.
Signal Strength uV
Voltage Vdc RMS
@ Pin
10 1.544
5 1.416
1 1.089
0.9 1.069
0.8 1.049
0.7 1.009
0.6 0.973
0.5 0.93
0.4 0.891
0.3 0.829
0.2 0.756
0.1 0.679
0.05 0.635