Icom IC-7300 - Its Mostly About The Receiver; Commonly Available Controls

3
■ Multi-function dial
The function of the Multi-function dial (
MULTI
) is enhanced.
* On the Multi-function menus, touch the item for 1
second to assign the function to
MULTI
.
To cancel the function assigned to
MULTI
, touch the
Function indicator for Multi-function control, or hold
down
MULTI
for 1 second.
Indicator Action
RIT
Rotate Adjusts the RIT frequency.
Hold
down
Clears the RIT frequency.
∂TX
Rotate
Adjusts the ∂TX frequency.
Hold
down
Clears the ∂TX frequency.
RIT ∂TX
Rotate
Adjusts the RIT ∂TX frequency.
Hold
down
Clears the RIT ∂TX frequency.
kHz
Changes the operating frequency in kHz
steps. (VFO mode only)
L Rapidly rotating
MULTI
automatically
increases the tuning speed.
M-CH
In the Memory mode, selects Memory
channels.
RF PWR* Adjusts the transmit output power.
MIC G* Adjusts the microphone gain.
COMP* Adjusts the Speech Compressor level.
MONI*
Adjusts the audio level for the Monitor
function.
SPEED* Adjusts the Keying speed.
PITCH* Adjusts the CW pitch.
NB LEV* Adjusts the Noise Blanker level.
NB DEP*
Adjusts the DEPTH (Noise attenuation
level).
NB WID*
Adjusts the WIDTH (Blanking duration
time).
NR LEV* Adjusts the Noise Reduction level.
NOTCH* Adjusts the Notch filter frequency.
VOX G* Adjusts the VOX gain.
A-VOX* Adjusts the ANTI VOX level.
VOX D* Adjusts the VOX delay time.
BKIN D* Adjusts the Break-in delay time.
When the Multi-function menu is closed,
MULTI
can
be enabled to adjust functions by pushing or touching
the item for 1 second on the Multi-function menus.
The function is displayed in the upper right corner of
the screen.
Function indicator for
MULTI