Icom IC-910H - Installation and Connections; Initial Setup and Antenna Considerations

12 © June 2011 Icom America
To Kill a Radio
1. Press the assigned TX Code CH Select key. The first radio entered in the TX Code CH displays.
2. Press the assigned TX Code Up key to scroll and select a target radio other than the radio displayed in
step 1. On some models, you may also use the Up/Down keys on the radio.
3. Press the assigned Call key. This sends the target radio’s 5-tone code and Kill command.
RX Radio:
Memory Ch
Field
Setting / Description
5Tone Signaling » Form
Set to EIA
5Tone Signaling » RX C.No
Set to 1. Points to 1
st
line in the RX Code CH window: the
RX Radio’s Kill or Stun ID
RX Code CH (under 5 Tone)
Field
Setting / Description
Line 1 » RX Code
RX radio Kill or Stun ID (from Memory Ch window)
Line 1 » Text
Add text, such as “Killed”
Line 1 » Stun
Select Kill or Stun from this menu