Icom IC-910H - Format Window; User Tone Window

22 © June 2011 Icom America
Format Window
Field
Description
Tone Period(Sec)
Controls the length of each individual tone sent by the radio.
Can be set from 0 to 0.255 seconds.
Notone Timer(Sec)
This is the maximum amount of time in between the
transmission of each tone.
Tone Length(Sec)
The maximum amount of time the radio will wait to decode each
tone on an incoming 5 tone signal.
User Tone Window
Field
Description
Encode (Hz)
Allows the user to define the frequencies for a custom 5 tone
format.
Decode Low (Hz)
Sets the low end of the decodable frequency range for the
frequency defined in the Encode field.
Decode High (Hz)
Set the high end of the decodable frequency range for the
frequency defined in the Encode field.